Details
Sensor: Auto foot lifter by fabric induction
Side-cutter: Individual operating, every sewing only cut 3 times no matter length (Front*1 Rear*2), less waste for the knife and won't cut the fabric. Easy and safe operation, no hand gesture request, suitable for 3,4,5 and 6 threads.
Suction: Only open when cutter start, effectively save air, inside front cover has an individual suction design can take away the cotton fibers from sewing.
Thread tension: Also open when cutter start, adjusting thickness between threads and cut off, effectively save threads.
Motor: Cooling by air suction from 4 directions, effecitvely cooling, less vibraction , no consumable。
Complete set including: Side-cutter, Foot lifter, Sensor, LED light, Thread tension, Suction, Direct drive servo motor.Easy operation, no gesture request, really reaches thread, air, electricity and labor saving!
| Brand | Overlock model | DINO model | 3, 4 threads | 5 threads | 6 threads | Remark |
| PEGASUS | M752 | M700 | v | |||
| M732 | v | |||||
| M852 | M800 | v | ||||
| M832 | v | |||||
| M832-355 | v | |||||
| M952 | M952 | v | ||||
| MX5204-3, MX5214-4 | MX5204 | v | ||||
| MX3216 | v | |||||
| MX3244 | v | |||||
| EX5204-3, EX5214-4 | EX5214 | v | ||||
| EX3216 | v | |||||
| EX3244 | v | |||||
| EXT5204-3, EXT3214-4 | EXT5214 | v | ||||
| EX3216 | v | Extra charge requirement | ||||
| EXT3244 | v | |||||
| EXT5114 | EXT5114 | v | v | |||
| JUKI | MO6704-3, MO6714-4 | MO6714D | v | MO6914R, Extra charge requirement | ||
| MO6716 | v | |||||
| MO6904-3, MO6914-4 | v | |||||
| MO6916 | v | |||||
| MO6500 | 747K | v | ||||
| MO6500 | 757K | v | ||||
| MO6500 | 767K | v | ||||
| SIRUBA | 747K(=988) | 747K | v | |||
| 757K(=988) | 757K | v | ||||
| 767K(=988) | 767K | v | ||||
| YUKI | YK5216-A04 | YK5214 | v | |||
| YK5214 | v | |||||
| YAMATO | CZ6003-3, CZ6020-4 | CZ6120 | v | AZF8000 Extra charge requirement | ||
| CZ6025-4, CZ6125-4 | ||||||
| CZ6120 | ||||||
| AZ8020-4, AZ8025-4 | AZ8020 | v | ||||
| AZ8125-4, AZ8120-4 | ||||||
| AG8020-4 | ||||||
| AZ8003 | AZ8003 | v | ||||
| TYPICAL | GN2000, GN3000 | M700 | v | v | ||
| KINGTEX | UH9003-3, UH9004-4 | UH9004 | v | UH9303, UH9304 Extra charge requirement | ||
| UH9005 | v | |||||
| UH9006 | v | |||||
| UH9303-3, UH9304-4 | UH9304 | v | ||||
| ZOJE | ZJ752-13 | M700 | v | |||
| ZJ732-38 | v | |||||
| ZJ952-13 | EX5214 | v | ||||
| ZJ932-38 | v | |||||
| JOYEE | JY-B804 | JY-B804 | v | |||
| JY-B805 | JY-B805 | v |
Additional Information
| Attachment |  |
|---|
