Details
‧ Consists of bed-knife, thread tension regulator,
foot lifter and transmission is necessary device.
‧ No collision design and permanently fixed.
‧ Going with servo motor can save 70%
electric power.
‧ It is adjustable and suitable for various threads.
‧ Low nosie, durability and stability without run out
of the position.
Bed-knife features A The original design of non-collision , stability without run out of the position. B The length of thread can be controlled and adjusted about 3-5mm by one screw.
‧ Uniquely horizontal layout is designed for foot lifter without noise to protect axis center and copper sleeve from being abraded. ( Also applies for machines with rear pulley.
Specification :
UT | WP | NDST | TWP | Voltage | Use | |
UT/WP | v | v | v | 2 needles 3 threads, without leaving threads of the beginning of stitches. | ||
UT/NDST | v | v | v | 3 needles 5 threads, cutting thread automatically. | ||
UT/NDST/WP | v | v | v | v | 2 needles 3 threads/ 3 needles 5 threads, need to take NDST/WP device apart. | |
UT/TWP | v | v | v | 2 needles 3 threads, without leaveing threads at the beginning of stitches. | ||
UT/NDST/TWP | v | v | v | v | 2 needles 3 threads / 3 needles 5 threads can be fit together permanently. |
Other :
Brand | Interlock model | DINO model | Remark |
PEGASUS | W664P | W664S | |
WT664 | |||
W600 | |||
CW600 | |||
W562 | W500S | Front cover W5026: Long type(18cm). | |
W562P-02 | |||
W562N | Front cover W1500-06: Short type(16cm). | ||
W452P-01 | |||
CW562N | |||
W1500 | W1500S | Slack thread set W1500-0 | |
W1500N | W1500S | Slack thread set W1662-0 DD motor S380 + 1662 bracket. | |
W1662 | W1662S | Thread cam inside. | |
W1662-Y2068 | W1662Y | Thread cam outside. | |
W264 Narrow | W264S | Extra charge requirement | |
WT264 | |||
W2600 | W2664S | ||
W2664 | |||
FS701P | FS713 | ||
FS713 | |||
YAMATO | VG3721 | VG2700 | All VG2700 need to attache 2 height of adjustment set. |
VG2735 | |||
VG2713 | |||
VG2700N | VG2700 | stment set of height VG2700M-UT07 . | |
VC2700 | VC2700S | Thread tension regular is side up. | |
VC2730 | |||
VC2713 | VC2713S | Thread tension regular is side down. | |
VC2700G | VC2713N/VC2700MN VC1700N | ||
VC1700 | |||
VC1790 | |||
CC2700 | CC2700S | Thread tension regular is side up. | |
CC2700M | CC2713N | Thread tension regular is side down. | |
VF2500 | VF2500S | Deep color cover | |
CF2300 | CF2300(VF2500S) | White color cover | |
VE2713 | VE2713 | Extra charge requirement | |
VT1500 | VT1500S | FE-936 | |
FD-62-DRY | FD62 | FE-46 | |
FD62G | |||
SIRUBA | C007H | C007HN’=C007H/J | Thread cam outside |
C007J | |||
C007J-W122-356 | |||
C007J-812-356/CRL | |||
C007J-W152-356 left | |||
S007K | S007KN | (1)Normally thread cam outside (2)Machine head of 1st version model CSK0003 is used for foot lifter of C007. (3)Machine head of 2nd version model CSK0003-1 is used for foot lifter of C858K. | |
S007K-W122-356/PCH-3M Narrow | |||
C858J | C007HN | ||
C858K(=C007K) | C858K | Normal thread cam outside. | |
F007H | F007HS/F007H | ||
F007J | |||
F858K(=F007K) | F858K | ||
GEMSY | GEM500B | W664S | |
GEM600B | W500S | Front cover W5026: Long type. | |
QINGBEN | QB1500 | VT1500S | |
TYPICAL | GK32700 | VC2700S | |
GK32500 | VF2500S | ||
GK370 | GK370S | ||
GK350 | GK350 | ||
GK335 | GK335S | ||
GK337 | GK337S | ||
ZOJE | ZJW122-356 | C007HN | Bracket is thick gear. |
ZJ2500 | VF2500S | ||
ZJW122 | F007HS F007H | ||
ZJW222 | |||
ZJC2500 | ZJC2500N | ||
JACK | JK8568 | W500S | Front cover W5026: Long type. |
JK8668 | W664S | ||
JK8670 | W264S | Extra charge requirement | |
SHING LING | VG888A-CF(=SG797) | VG888A-CF-E/SG797N | SG797 Under knife set. |
VG888S Narrow | VG888SS | ||
FG666 | FG666/SG787E | ||
SG787 | |||
SG798 | VF2500S | White color cover. | |
KINGTEX | CT9000 | CT9000 | |
FT6500 | VF2500S | ||
FT7000 | |||
KANSAI SPECIAL | RX9803 | RX9803 | |
WX8803 | WX8803 | ||
W8803D | |||
WX8803D | |||
REX9803 | REX9803N | ||
JUKI | MF7823 | MF7823 | |
MF7823D | |||
MF7723 | MF7723 | Need to be changed left cover if the series number is after 8MEC11760. |